Some help with ableton live lite 7 needed

imkeith

Banned
Hi guys few days back i purchased a gx tone port and it comes with live lite and some other software
apparently im having trouble getting live lite to produce any sound.. i highly doubt there's anything wrong with my speakers, my pod farm was sounding fine when i had the live lite running.

help anyone ?
 
live lite or live or any other daw, will need you to feed signal into the individual track and output to master audio channel before you can hear anything.

If you are running pod farm, you might wanna check out online if it can be "rewire"(http://www.propellerheads.se/products/reason/index.cfm?article=rewire&fuseaction=get_article) into live and run it externally as standalone program or within live lite as vst.

Live is a daw and need to receive signal first before it can output to the audio channel. If your geetar signal is going through pod farm and out to speaker, you will be hearing it direct and not through live lite. To hear it from live lite, you need to re route your signal, thru pod farm, into live lite track, arm it and output to master audio channel.
 
but i manage to record what i want on live but i when played back i there's no sound
on the contrary the other program that comes along with the toneport, riffwork works fine.. but sadly i cant find a way to convert it's .rws file to an mp3 file :(
 
ok i managed to get some sound outta live now by removing the jack connected from my tone port to my speakers. but then now my pod farm there's no sound comin out from it :( if i plug it back in = pod farm has audio and live doesnt :( dam help someone :( my head's crackin
 
1. What are you recording (audio or midi)? If midi, what sound generator are you using? Hardware or software? If it's software, which VSTi?
2. Can you explain your entire connection chain between your PC and your hardware, both audio and midi (the latter if you are using an external hardware sound generator/module)?
 
Last edited:
Back
Top