Mr_X said:
http://www.jimdunlop.com/products/maintenance/frets/index.html
This will help you i guess
My Guitar Mod!!!
- Thread starter ShredCow
- Start date
http://www.jimdunlop.com/products/maintenance/frets/index.html
This will help you i guess
Praetorian
New member
pooo said:
+1
Praetorian
New member
Can. You just need the right connections.
I'll let you know when I get more details on LED's. :twisted:
I'll let you know when I get more details on LED's. :twisted:
Praetorian
New member
satch said:
8)
LED's are gonna cost about $250/= for entire neck, in dot layout. But you need to squeeze in a 9v battery somewhere, chances are in a new hole. I also heard LED's affect the tonal qualities of the guitar.
Seeing as how mine is a Super Wizard neck, LED's + scallops = nonexistant tone.
So I guess I'll forgoe the scallops. Ah well.
hullabalooeeks
New member
whats the LED thing?? Adding light on ur neck and flash ah?? haha can include photos?
Man... I had a bad run in...
Sent the guitar in for a rewiring, installing the new 5-way Gotoh switch, push pull vol pot for out of phase, fender no-load tone pot...
Now, the guitar came back with messed up wiring. 1 position on the switch didn't work... push pull was crackling and so was the no load tone pot. Very unhappy, sent it to Randolf, he reported the new Switch and Push Pull pots were damaged and the wiring was shoddy.
I lost a good deal of cash that day.
In the end, Randolf helped me rewire to Ibanez specs... and the only special thing is the no load tone pot.
I decided against refretting... no need for that till maybe a year's time?
Anyway... I had an X2N installed... but thats going soon, getting a Tonezone to replace it... the X2N is great but I would like something less hot...
Sent the guitar in for a rewiring, installing the new 5-way Gotoh switch, push pull vol pot for out of phase, fender no-load tone pot...
Now, the guitar came back with messed up wiring. 1 position on the switch didn't work... push pull was crackling and so was the no load tone pot. Very unhappy, sent it to Randolf, he reported the new Switch and Push Pull pots were damaged and the wiring was shoddy.
I lost a good deal of cash that day.
In the end, Randolf helped me rewire to Ibanez specs... and the only special thing is the no load tone pot.
I decided against refretting... no need for that till maybe a year's time?
Anyway... I had an X2N installed... but thats going soon, getting a Tonezone to replace it... the X2N is great but I would like something less hot...
there is this band who played in tribute to helloween gig who did tat to their gtrs...they had lights on them n e stage when dark...cool guys...i think i was behind them tat day at burger kings cineleisure...haha they shud be softies too....HEY guys! u there!?? haha...identify urself....haha..
I don't want to reveal the shop's name becuase I went back to that shop and the owner REFUNDED me the cash. Becuase of that, I will go back.
But not to the tech that is.
The Fender No Load Tone Pot is a 250k tone pot (I wanted a warmer tone so I decided to go 250k despite having 2 hum config). Works like a normal tone pot from 1 - 9... at 10 it clicks into position and bypasses itself. So its like having no tone pot there. Increased brightness and makes the tone more cutting.
But not to the tech that is.
The Fender No Load Tone Pot is a 250k tone pot (I wanted a warmer tone so I decided to go 250k despite having 2 hum config). Works like a normal tone pot from 1 - 9... at 10 it clicks into position and bypasses itself. So its like having no tone pot there. Increased brightness and makes the tone more cutting.
GuitarNoob
New member
Tts 1 sweet guitar man, is tt a custom paint job? Never seen anything like it
