Korg x 50 and a KP2 Kaoss PAD

GUYrenCE

New member
hi..

anyone heard of Korg x50 ??

can a KP2 KAOSS Pad link to Korg x 50?

link being join together

??well, i still researching of this two products so yeah. please forgive me if they are wrong or not link or somthing else..


anyone have those two products??
 
i dont play keyboard, but got kp3 and mini kp for guitar usage

with the x50, most prolly just need a RCA to 1/4 inch jack to connnect the 2.

p25670h-2ce01cacac74a6bea675d5d9ae8fce73.jpg
 
Both can be connected by midi. The question is: do you know why you want to connect them? Do you want Kaoss to control the parameters of X50 or vice versa?
 
I thought the point was for the Kaoss pad to be used as an effects processor and not a midi controller.
 
Haha. Iansoh, you're absolutely right. I don't know what I'm talking about. Must be still in dream land. Entirely ignore my post...
 
hmm.. if i need a midi.. i would had buy other stuff..


hmm.. the X50 is a synis

as for KP2
hmm.. am i right to say it's just a effect support..



any place sell this??
 
The KP1, KP2 and KP3 are table top effects units yes... but it has a built in synth engine as well (hence the few synth patches) ... but minimal... They have built in sampler as well (KP2 has two tracks, KP3 has 4 tracks) ... it's a great toy :)
 
The real question is: do you have enough hands to play your bass AND fiddle around with the Kaoss?
 
my final question is


can i link to my BASS??

yes you can, most simplest way is to get 2 rca to 1/4' jack cable to connect. But unfortunately, these be lost of high frequency and volume, making it pretty much useless.

kp meant to be use with line level instrument instead of guitar and bass signal level. .

the way which i use the kp with guitar is to build a active looper with clean boost to push the post kp effect to unity volume as guitar signal and blend together, controlled via expression pedal on the amount of mix between unaffected guitar signal and effected KP signal
 
so if im doing it..

i would have to make a new EQ of my
Bass and pickups stats??



hmm..hahaha...yes..that kind of sound,it's really that kind of sound which you never seen many musician had ever done...


so what KP are you using??
also where did you brought it?
 
Pathein bro power sia... doesn't matter where he got his... when it's not enough he will build his own. He is in another league... anyway, I use mic in for the guitar sounds, but I don't know how to play guitar anyway so I use them as sounds... so in that sense, it depends on what you want to achieve...

The only issue I felt is that some effects, by bringing the effects volume up, will cut the signal in (eg delay 9... ) that means by bringing the effects volume up will relatively cut the signal in... some effects doesn't (Delay 4,5,10... grain5) so I know why Pathein need to use a volume pedal on top... I wonder why KORG built it in such a way... still it's a wonderful toy...:D

You CAN play guitar or bass with a KP because it has a touch memory for KP2 and KP3 ... you can "pre-record" the movement on the pad and set it going on auto and then play whatever you need to play... It's up to you want you want to do... cheers
 
thanks thanks...for everyone that take a look and answer my question..

thanks alot...


well, if you have more information about this

KP stuff or X50

just put down...
well,im still doing a huge research for this 2 products..

thanks!!!
 
Back
Top