HELP!!! nid help in wiring picts up

[taytehni]

any softies know how to connect 2 lespaul humbuckers to a tone pot a volume pot a jack n capacitors n also a 3 way lever switch?
PLS help me ty alot

 

[Tetragrammaton]

If you could understand circuit drawing, that wouldn't be much of a problem. You can get these circuit drawings easily by downloading it from the net, electronic books, etc. If you don't it's better to send it to a guitar shop for rather simple soldering where it seems to be seen. Or you'll end up messing up the circuitry.

Saluti!
Tetragrammaton

 

[Victorinox]

You should check out this seymour duncan wiring diagram page

Check out the seymour duncan page:

http://www.seymourduncan.com/support/schematics.shtml

Its where I go to everytime I wire up something new.

 

[taytehni]

dun really understand as my 3 way switch is lever n that my pickup is from lespaul de. its already wrapped together. onli can see a red n a bare wire.

 

[Victorinox]

Sorry that didnt help much.

Not sure what a lespaul de is but i think your bare wire is a ground wire which you should solder to the back of the volume pot and the red wire you should solder to the switch.

Again just my guess, but assuming your switch is like a 5 way but with only 3 notches, I think you can solder one red wire to the bridge lug and solder the other red wire to the neck lug.

Solder an additional wire from both bridge and neck lug to the middle lug,
and another wire from the middle lug of the switch to the left lug of the tone pot (to make it similar to the SD 2 humbucker 1 vol 1 tone 3 way diagram).

Back to the switch. The common lug that connects to all 3 positions, solder that to the back of the volume pot.

Quite hard to imagine with just words and it could be totally off but try it if you can decipher it. If not, just pay beez a visit and pay him to do it. Heard he'll teach you if you want him to as well.

 

[penguin]

hi check this out
http://www.seymourduncan.com/support/schematics/3ws_trans.html
http://www.seymourduncan.com/support/schematics/2h_1v_1t_3w.html

hmm abt the wire u mention red is the "live" as in black for duncan ..
and bare as in ground..that is to be soldered to the vol pots..

 

[Victorinox]

Penguin seems to have pointed you in the right direction. Try it and let us know if it works.

 

[taytehni]

k will try it n let u guys know. thanks for these help =D

 

[wjl123]

ah the diagrams are alittle wierd... dont see 4 wire on the pickup. onli a white 1 and a bare.

 

[Ratboy]

The bare one will be equivalent to the black one in the diagram
the white one will be equivalent to the green one in the diagram
( as far as i can guess w/out seeing your actual pickups )

the other 2 wire that you cannot see ,
the diagram shows red and white taped together
are somewhere in your pickup already taped together.

 

[wjl123]

ok got some pics up
the pickup selector part

overall

Sorry for the blurry pictures, taken from my handphone.

haven wire finish but we encounter some problems. The pickup selector shown in the Seymour duncan diagram and the pickup selector Tehni have is different so, we dint really know how to follow it.(we are no pros..)

so Help is really appreciated !!!

 

[wjl123]

the pickups are epiphone stock humbuckers.