Fender Neck.....
- Thread starter Writer
- Start date
I think you don't have a way to choosing Fender original neck(or custom shop), be it MIJ/M/A. This is because I think these are not stocked locally at all. Only way is by order. Which means you order it and pay for it and wait for it to come.
There are only a few shops selling replacement necks, those mentioned above. Guitar connection do carry Fender licensed neck from Allparts, which is as good or better then originals. These are direct replacement parts too. With serial number and stamped "Fender" part at the neck shoe side (hidden when assembled).
Do correct me if I am wrong.
There are only a few shops selling replacement necks, those mentioned above. Guitar connection do carry Fender licensed neck from Allparts, which is as good or better then originals. These are direct replacement parts too. With serial number and stamped "Fender" part at the neck shoe side (hidden when assembled).
Do correct me if I am wrong.
neuro182
New member
Guitar Connection
Talking about Guitar Connection...
Last time I caught the owner aback when I was asking some questions about my axe upgrade, he was like pasting a Fender sticker on the neck & panicking as well. I wonder if they realli do sell authorised replacement for Fender necks?
Talking about Guitar Connection...
Last time I caught the owner aback when I was asking some questions about my axe upgrade, he was like pasting a Fender sticker on the neck & panicking as well. I wonder if they realli do sell authorised replacement for Fender necks?
neuro182
New member
Hmm
I onli noe dey sell some necks dat has the shape exactly similar to a Strat or Fat Strat, but all of them are like brandless. Another time, lyk I saidi n my previous post, the owner dipped e Fender logo in water or some solvent, den stick it on the "brandless" neck.
I wonder if its authentic. Can anyone help me?
I onli noe dey sell some necks dat has the shape exactly similar to a Strat or Fat Strat, but all of them are like brandless. Another time, lyk I saidi n my previous post, the owner dipped e Fender logo in water or some solvent, den stick it on the "brandless" neck.
I wonder if its authentic. Can anyone help me?
Errr.... nero I think you better watch how you put it. We don't want flaming on soft caused by careless comments. You been postin a lot lately, but like we say between quantity and quality, can tell a lot about a person.
Anyway. My understanding is that those are Allparts necks, which is one of Fender's authorised neck builders. Which is licenced to build to spec Fender's exact same dimension and quality. Which is why I say there is serial number and a "fender" stamp chopped on where the light don't shine. Which goes to say that these are infact Fender OEM necks.
Since Fender goes all out to take legal action on anyone who copies even close to it's specs (eg. fernandes, greco...etc). Thus you tell me if logically Allparts are Fender stuffs or not???
So by puting the logo on a blank headstock of an authorised part, you tell me if there is a problem to that??
Do correct me if I am wrong. I just stating what is from back of my mind.
We can do with less anywhere anyhow OTOT care-less questions around here. Regular forummers are helpful, but not to the extent of answering the whims of whatever-anyhow shoot questions. (Reference to my post of the Net-gen surfers and the habit of instant gratification expectance)
BTW. I am not part of GC, just a good friend of the proprietor.
Anyway. My understanding is that those are Allparts necks, which is one of Fender's authorised neck builders. Which is licenced to build to spec Fender's exact same dimension and quality. Which is why I say there is serial number and a "fender" stamp chopped on where the light don't shine. Which goes to say that these are infact Fender OEM necks.
Since Fender goes all out to take legal action on anyone who copies even close to it's specs (eg. fernandes, greco...etc). Thus you tell me if logically Allparts are Fender stuffs or not???
So by puting the logo on a blank headstock of an authorised part, you tell me if there is a problem to that??
Do correct me if I am wrong. I just stating what is from back of my mind.
We can do with less anywhere anyhow OTOT care-less questions around here. Regular forummers are helpful, but not to the extent of answering the whims of whatever-anyhow shoot questions. (Reference to my post of the Net-gen surfers and the habit of instant gratification expectance)
BTW. I am not part of GC, just a good friend of the proprietor.
Writer said:
Allparts neck have blank headstock. You have to put on logo or your own design.
Writer said:
Guitar connection do trade-in of guitar and parts. They are a licenced 2nd hand dealer. So often they will make an offer when someone makes an upgrade to a new neck. To my knowledge, they do have some vintage necks, pickups, bridge...etc parts.
Stock wise, of course is inconsistent. If you are lucky, they could have a special model you are looking for. All about luck. Just go and ask them if you are looking for something.
Do note that vintage parts do hold a certain value, so do not expect them to be like used parts price. When a trade-in is done, sometime the dealer even have to top up to the customer for his part if the value is there. So be mature when asking, don't act like "jaws drop" when quoted something. You will look very stupid, for acting stupid and asking stupidly. There is a reason and valuation behind the item quoted.
Err.... Dear neuro,
You can take it in 2 ways. One, as a friendly advise from a fellow softie about netiquette. Or other, as I am fired up (your own perception).
Like we say, in any community, if you dont look out for one and another, sooner or later you will fallout and move on.
Just let me ask you this. Have you been returning to the forum community what you have been taking all this while (constructive comments, encouragements and helpful tips & advise).
So you tell me if I have been helpful or counter helpful??
You can take it in 2 ways. One, as a friendly advise from a fellow softie about netiquette. Or other, as I am fired up (your own perception).
Like we say, in any community, if you dont look out for one and another, sooner or later you will fallout and move on.
Just let me ask you this. Have you been returning to the forum community what you have been taking all this while (constructive comments, encouragements and helpful tips & advise).
So you tell me if I have been helpful or counter helpful??
mikemann said:
Yes, it's a serious offence if the logo being pasted is from another copyrighted brand and it is put on the market as a commercial item. It applies to any stuffs, not only guitar neck.
Being authorized doesn't mean it can carry the same brand. Allparts is Allparts, fender is fender.
BTW, I have checked this with Warmoth guy when I wanted to order Warmoth neck. They do state this clearly on their website too, that they do not put any decal, although they are also authorized fender part maker.
I think the idea here is that, the neck come in ONLY blank or "house brand" form. Same as with Allparts.
It's up to the new owner to dictate if he wants to put whatever decal he wants on the stuff he already purchased.
One posibility is that, the owner has a fender with a spoilt neck, so he replaces it with a authorised one (warmoth or allparts or....). Naturally he will want the original decal that he had before.
Just like Floyd rose trem, original ones carry the name. All other with licence also put the name with a "......licenced" behind.
It's up to the new owner to dictate if he wants to put whatever decal he wants on the stuff he already purchased.
One posibility is that, the owner has a fender with a spoilt neck, so he replaces it with a authorised one (warmoth or allparts or....). Naturally he will want the original decal that he had before.
Just like Floyd rose trem, original ones carry the name. All other with licence also put the name with a "......licenced" behind.
Pseudo-Jazzman
New member
so THAT'S the way it is~~
I learnt alot today!! :lol:
BTW, has anyone tried putting a P bass neck on a jazz bass?
I learnt alot today!! :lol:
BTW, has anyone tried putting a P bass neck on a jazz bass?
wangdexian
New member
Or just get a Warmoth neck replacement.
The Hoppus isn't for everyone, although I like it. :lol:
The Hoppus isn't for everyone, although I like it. :lol:
neuro182
New member
Haix
spikes: i noe hez trying to be friendly.. but the thing is i noe wat im doin or saying
its lyk u dunnid to be told how to go to e loo to relieve yourself, do u? datx wat hez trying to tell me to do. besides, im finding out more info rather than accusing den he ask me to watch wat im saying? zzz!!
how can i ever see words that comes out from my mouth? *lolx*
spikes: i noe hez trying to be friendly.. but the thing is i noe wat im doin or saying
its lyk u dunnid to be told how to go to e loo to relieve yourself, do u? datx wat hez trying to tell me to do. besides, im finding out more info rather than accusing den he ask me to watch wat im saying? zzz!!how can i ever see words that comes out from my mouth? *lolx*
Pseudo-Jazzman
New member
how does the hoppus sound lyk?
I really dig the shell pink finish!!
and Gerald~~ chill la~~
Dun give st. Hilda's a bad name~~
You ARE from SHSS rite? 8)
I really dig the shell pink finish!!
and Gerald~~ chill la~~
Dun give st. Hilda's a bad name~~
You ARE from SHSS rite? 8)
