WTS: DBX 166XL Compressor/Limiter & DBX 234 Crossover Made in USA!

vickitek007

New member
photo1_zps057b8f70.jpg

photo2_zps7197252c.jpg

photo3_zpsa3daf7e7.jpg


1. DBX 166XL - S$ 150

Most compressor/gates provide less than musical compression, coupled with gating that swallows transients—or closes early, cutting off decay and reverb tails. The superb engineering in the 166XL ensures that both its compression and gating provide versatility and excellent sonic performance in situations where other compressor/gates typically produce undesirable processing artifacts.
When using the 166XL’s Attack and Release controls, artists and engineers will find that the center settings deliver classic dbx compression, while the full control range produces voicings that extend from slow “leveling” to aggressive “peak” limiting.The 166XL’s advanced gate circuitry uses a completely new, program-dependent timing algorithm to produce ultra-smooth release characteristics—even with complex signals, such as voice or reverb decays. dbx engineers went on to take advantage of the wide dynamic range and high precision of the dbx V1 VCA to design in an extra-wide threshold range and ensure top gating performance for each application.
Goof proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
New gate timing algorithms ensure the smoothest release characteristics
Program-adaptive expander/gates
Great sounding dynamics control for any type of program material
Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
Stereo or dual-mode operation
Balanced inputs and outputs on 1/4" TRS and XLR
Side Chain insert
Classic dbx® "Auto" mode

Went to service shop to do checking in March 2012 and still fully functional.

2. DBX 234 Crossover - S$150


The dbx 234 Stereo 2/3 Way Mono 4-Way Crossover lets you choose 2-way, 3-way, or mono 4-way operation via 2 back-panel switches. A third switch lets you mono sum the LF output. Crossover frequencies are selectable individually for both channels. Each channel has an input gain control ranging from 0 to 6dB, phase reverse switch, and 40Hz low cut filter. TRS differentially balanced 1/4" I/O, 24dB per-octave Linkwitz-Riley filters, and stereo/mono status LEDs.
Features:
TRS differentially balanced I/O
Mode switch for mono 4-way or stereo 2 way/3 way operation
Low frequency summed subwoofer output
x10 range switch on both channels
40Hz high pass (low cut) filter on both channels
Phase reverse on all outputs
Individual level controls on all band outputs
24dB octave Linkwitz-Riley filters
Stereo/mono status LEDs

Recently repaired in Dec 2011 and fully functional! Never used since repaired.




Testing done at Ubi Ave 1 only during office hours and Sat mornings. Please call me at 91o9 8359 to arrange. Discount only if items bought together.

NOTE: Once item is bought, no refund is accepted. Please bring your own equipment and test with your own equipment before committing to buy. Thanks a lot.
 
Back
Top