Greetings fellow SOFTies,
Would like your inputs on my incoming project/upgrades.(kind in the budget area here: roughly about $500-$600)
This what I have currently in my mind.(well if you guys have more ideas feel free to input though)
Guitar Specs as follow:
Body: Nato
Neck: Maple Set-neck
Fingerboard: Rosewood
Bridge: LS-VBC Bridge
LS-VTC Tailpiece
Pickups: LSC F-3
Controls:3V, 1T, 3way-SW
Upgrades ->
Replacing all stock 3 Humbucker PUs to :
1.Tesla VR-60 classic (Neck)
2.Tesla VR-P90 (Middle)
3.Tesla VR-60 classic (Bridge)
Replacing all 3 Vol and 1 Tone pot:
1.Neck Volume: Push-Pull Pot 500K with 0.47 cap
2:Middle Volume :True Vintage TVT CTS pots with 0.22 cap
3.Bridge Volume: Push-Pull Pot 500K with 0.47 cap
4.Tone : 250K pot with 0.22 cap
3 way switch configuration wiring:
1.Rhythm : Neck PU
2.Middle : Both PUs
3.Treble : Bridge PU
Nut : replaced to Bone.
My middle pickup ( Tesla VR-P90 ) will always be on.If i don't want to use it can simply roll-off to '0'.
If you guys have any shop/tech guys to recommend feel free to input here.
Any more suggestion are welcome.
Would like your inputs on my incoming project/upgrades.(kind in the budget area here: roughly about $500-$600)
This what I have currently in my mind.(well if you guys have more ideas feel free to input though)
Guitar Specs as follow:
Body: Nato
Neck: Maple Set-neck
Fingerboard: Rosewood
Bridge: LS-VBC Bridge
LS-VTC Tailpiece
Pickups: LSC F-3
Controls:3V, 1T, 3way-SW
Upgrades ->
Replacing all stock 3 Humbucker PUs to :
1.Tesla VR-60 classic (Neck)
2.Tesla VR-P90 (Middle)
3.Tesla VR-60 classic (Bridge)
Replacing all 3 Vol and 1 Tone pot:
1.Neck Volume: Push-Pull Pot 500K with 0.47 cap
2:Middle Volume :True Vintage TVT CTS pots with 0.22 cap
3.Bridge Volume: Push-Pull Pot 500K with 0.47 cap
4.Tone : 250K pot with 0.22 cap
3 way switch configuration wiring:
1.Rhythm : Neck PU
2.Middle : Both PUs
3.Treble : Bridge PU
Nut : replaced to Bone.
My middle pickup ( Tesla VR-P90 ) will always be on.If i don't want to use it can simply roll-off to '0'.
If you guys have any shop/tech guys to recommend feel free to input here.
Any more suggestion are welcome.
Attachments
Last edited: