Fret-Buzz problem, Help!

[Batlovesowl]

Hi guys!

I need help, when i tuned my guitar to E my string buzz from fret 1 - 4 on all six strings, heavily on fret 1 low E and fret 4 G and B string. When I tune it to D, strings buzz more but still from fret 1 - 4, low D string fret 1 is totally flat.

The follow up action i is to press down fret 1 and last fret on my low E string. there is totally no gap inbetween my frets on 7 8 9.

What should i do? Please advisE!

Regards,
Batlovesowl

 

[faekildare]

Maybe action too low?
When u plug into amp got fret buzz out of the amp?
Any worn out frets?

 

[Batlovesowl]

Yes there are buzz when i plug in to the amp when tune to D, E is still ok i can hear the buzz from the neck only.

 

[junkiemanxl]

Hi guys!

I need help, when i tuned my guitar to E my string buzz from fret 1 - 4 on all six strings, heavily on fret 1 low E and fret 4 G and B string. When I tune it to D, strings buzz more but still from fret 1 - 4, low D string fret 1 is totally flat.

The follow up action i is to press down fret 1 and last fret on my low E string. there is totally no gap inbetween my frets on 7 8 9.

What should i do? Please advisE!

Regards,
Batlovesowl

Just my 5 cents worth...

Your neck might have some warp in it. You may need to make some neck adjustments with a slight bow (Concave) But not too much. After doing that right, then adjust the saddles for the height action.

If you are not comfortable or have no experience in doing neck adjustments, i would highly recommend that you bring your guitar to a good guitar tech as sometimes doing it wrongly might cause very bad damage to your guitar neck.

If you want to give it a shot, try googling for truss rod adjustments and you should be able to find a lot of information on the ways of adjusting your truss rod.

Hope this helps.