jeffrey0603
New member
Can i use a boss 9v power adaptor on my line6 pod?? Bothe have same polarity and voltage. And where and how much can i get them?
Thanks in advance!!
Thanks in advance!!
Boss power adaptor on line6?
- Thread starter jeffrey0603
- Start date
PatheinRaindropMoe
New member
you will have to check how much current is the pod drawing(usually in milliampere, mA)
even if the polarity and voltage is correct, but if the boss one cannot supply enough current, it still wont power up the pod and might result in blown adaptor
eg, if the boss adaptor secondary spec is 9vdc, 300mA but the pod requires supply of 9vdc at 600mA. The pod will need to draw 600mA to be power up, but adaptor can only give 300mA. Even if can power up the thing, the pod will be straining the adaptor, trying to suck out more from it. Adaptor wont be too happy in this case
even if the polarity and voltage is correct, but if the boss one cannot supply enough current, it still wont power up the pod and might result in blown adaptor
eg, if the boss adaptor secondary spec is 9vdc, 300mA but the pod requires supply of 9vdc at 600mA. The pod will need to draw 600mA to be power up, but adaptor can only give 300mA. Even if can power up the thing, the pod will be straining the adaptor, trying to suck out more from it. Adaptor wont be too happy in this case