Applications
Studio nearfield monitoring
Video edit and post-production suites
Multimedia
Small venue sound reinforcement
Main Features
High definition Linear Phase design
Superb sonic accuracy
Neutral, balanced sound for accurate monitoring
Magnetically compensated
High-quality crossovers with film capacitors and air-cored inductors
Custom-designed drivers
25mm ferro-fluid cooled soft dome HF driver
165mm cone LF driver with solid-cast chassis and 30mm edge-wound voicecoil
Terminals allow bi-wiring
Vented cabinet with special port for smooth low-frequency performance
The Inside Story
As with Spirit mixers, the electronic design of Absolute 2 uses high quality components, including film capacitors and an air-cored inductor,in a circuit that embodies classically simple design principles. Terminals allow bi-wired as well as standard connections.
Rather than compromise with off-the-shelf components, we use custom hardware built to our specifications - both drivers are exclusive to Absolute2.
The ferro-fluid cooled soft-dome tweeter ensures minimal distortion,with excellent heat dispersion. Not only does that mean a more accurate sound, but it puts less strain on your ears after long periods of high-volume monitoring (and don't pretend you don't like it loud!)
The LF driver features a solid-cast chassis and 30mm edge-wound voice coil, for optimum efficiency and cooling. That means you can push Absolute 2 to the limits and still hear music, not distortion.
The vented cabinet employs a special port design that does more than simply deliver extended bass response. With its carefully chosen dimensions, air turbulence is reduced, contributing to Absolute 2's smooth, uncoloured low frequency characteristics.
USING ABSOLUTE 2
Absolute 2's are designed to work best in the upright position, but they can be used horizontally if preferred. Bass response is best when the cabinets are close to a back wall.
Amplifier power ratings of up to 100 Watts RMS can be used, though more powerful amplifiers can be used with caution.
Connection to Absolute 2 is by high quality terminal which will accept bare wires, 4mm 'bannana' plugs or 6mm fork terminals.
Bi-wiring of the HF and LF connections can be made by removing the shorting links supplied and using two sets of cables from the amplifier. This will improve sound quality slightly by reducing the interaction between the drivers in the region of the crossover frequency.
Specifications
Power Handling (programme) 100 Watts RMS
Frequency Response (+2dB, -3dB) 45Hz - 20kHz
Impedance 8 ohms nominal
Sensitivity, for 2.83V @ 1m 90dB
Dimensions (HxWxD) 395 x 235 x 297mm (15.5 x 9.25 x 11.7")
Weight (net) 7kg (15.4lb) approx.
COMES in original box....top condition home use set. Classic design
self collect Ang Mo kio Ave 3, Block 573, 10 mins walk from MRT.
$280.00