wts DIY Pedal Board (pics inside)

[WILLZ]

Hi guys, i would like to sell my diy pedal board for $70. the dimensions are 77cm x 30cm x 10cm i think. it comes with a keyboard bag to hold it. below is the link to the picture of the board (placed a korg pitchblack on the board to show the size of the board). interested parties contact me @ 82005990. deal at toa payoh, novena, newton, boonkeng, marymount, lavender, bugis MRT

http://sphotos-a.ak.fbcdn.net/hphotos-ak-ash3/523313_10151003712895388_1003669841_n.jpg

 

[Khai HeadrusH]

Hi there. If im not mistaken, this is a gorm shelf. Retailing locally for S$15.50 for two. Fyi.

 

[Nefianz]

it comes with a keyboard bag to hold it.

Well at least it includes a bag and board was slightly modified

 

[Khai HeadrusH]

Well at least it includes a bag and board was slightly modified

My bad.. btw isit a generic bag?

 

[WILLZ]

No worries MrBlade HeadrusH, I priced it at $70 for the work like the velcro, nailing, sanding, lacquer finishing,the elevation boards for your powersupply and ease of use for your feet and YES the generic keyboard bag cuz its just too expensive to create a custom bag for it! so its priced for the amount of work done to it, the generic keyboard bag, and u get the length that is somewhere near pedaltrain pro which costs alot more! the velcro has adhesive to it, and its also been nailed in with elevation blocks, so its very unlikely to come off the board when you pull your pedals out.

The elevation boards is 4 piece of blocks with an angle, so the whole board is still diagonal like the real deal pedaltrains and not parallel to the ground with a 10+ cm height from floor to top panel.. 4 pieces because as its made of wood, the middle section MIGHT bend and snap if you do heavy stomping on it!

 

[WILLZ]

bump! still available