PogingBagsik
New member
Features of SS-11 Design:
Fully tube-based
4 - stage overdrive channel with DUAL TUBE design (2x12AH7 tubes) with high-voltage anode voltage (+300 V).
Three separate channels: CLEAN / OVERDRIVE / LEAD
Individual gain sensitivity and output level controls for clean and crunch/lead channels.
TREBLE SHIFT toggle switch to enter bright mode for that added punch of high end.
FX LOOP for external effects.
OUTPUT jack for connecting to both specialized guitar amplifiers with a standard level of 0 dB (GUITAR AMP mode) and a CAB SIM MIXER out with a standard level of -10dB and a guitar cabinet simulation.
The preamp outputs are equipped with sophisticated solid-state buffers.
SS-11 incorporates new field-effect transistor-based guitar cabinet impulse response emulator prossessing. Improved naturalness of sound when connected to line input.
Special attention was paid to transistors anode power quality: preamp uses a specially designed high-voltage transformer minimizing the penetration of impulse noises into amplified signal.
Description of SS-11 Channels:
LEAD channel provides thick viscous sound for playing both chunky rhythm parts and singing solos with excellent presence. TREBLE SHIFT toggle to take your lead sound into bright mode, similar to the good old "Treble Booster" pedals in the 80's that guitarists used to enhance their solos.
OVERDRIVE channel features a more open structure of the sound. This is the SS-11's sweet spot! VERY tubey and saturated sounding, much like that of the classic tube amps of the 70's and 80's! Wide range of sensitivity adjustment results in the sound starting from light crunch to thick and bright lead channel-like sound. Natural tube tone. If you're looking for something other than that dull sounding solid-state OD or TS clone sound, then THIS IS IT.
CLEAN channel focuses on crystal clarity clean sound. Low, Mid, and High controls for tweaking your sound; as well as and TREBLE SHIFT toggle for adjusting high end response.
SPECIFICATIONS:
Tubes: 12AH7 x 2
Input Impedance Rear Panel: 1MOhm
Input Sensitivity Rear Panel: -10dB
Output Impedance: 10kOhm
Power Voltage: 12vDC (-)center
Power Consumption: 600mA or .6A
Price: $350
sms 96308376
location: punggol, tanjong pagar, raffles mrt
Fully tube-based
4 - stage overdrive channel with DUAL TUBE design (2x12AH7 tubes) with high-voltage anode voltage (+300 V).
Three separate channels: CLEAN / OVERDRIVE / LEAD
Individual gain sensitivity and output level controls for clean and crunch/lead channels.
TREBLE SHIFT toggle switch to enter bright mode for that added punch of high end.
FX LOOP for external effects.
OUTPUT jack for connecting to both specialized guitar amplifiers with a standard level of 0 dB (GUITAR AMP mode) and a CAB SIM MIXER out with a standard level of -10dB and a guitar cabinet simulation.
The preamp outputs are equipped with sophisticated solid-state buffers.
SS-11 incorporates new field-effect transistor-based guitar cabinet impulse response emulator prossessing. Improved naturalness of sound when connected to line input.
Special attention was paid to transistors anode power quality: preamp uses a specially designed high-voltage transformer minimizing the penetration of impulse noises into amplified signal.
Description of SS-11 Channels:
LEAD channel provides thick viscous sound for playing both chunky rhythm parts and singing solos with excellent presence. TREBLE SHIFT toggle to take your lead sound into bright mode, similar to the good old "Treble Booster" pedals in the 80's that guitarists used to enhance their solos.
OVERDRIVE channel features a more open structure of the sound. This is the SS-11's sweet spot! VERY tubey and saturated sounding, much like that of the classic tube amps of the 70's and 80's! Wide range of sensitivity adjustment results in the sound starting from light crunch to thick and bright lead channel-like sound. Natural tube tone. If you're looking for something other than that dull sounding solid-state OD or TS clone sound, then THIS IS IT.
CLEAN channel focuses on crystal clarity clean sound. Low, Mid, and High controls for tweaking your sound; as well as and TREBLE SHIFT toggle for adjusting high end response.
SPECIFICATIONS:
Tubes: 12AH7 x 2
Input Impedance Rear Panel: 1MOhm
Input Sensitivity Rear Panel: -10dB
Output Impedance: 10kOhm
Power Voltage: 12vDC (-)center
Power Consumption: 600mA or .6A
Price: $350
sms 96308376
location: punggol, tanjong pagar, raffles mrt
