WTS 2 project guitars (LP + tele)

laosai

New member
Need to clear these guitars before i butcher them up again.

Gibson LP project guitar
Set neck glue in construction, hide glue, medium tenon
- 2 piece neck scarf joint, real mother of pearl sharp-end trapezoid inlay on rosewood fingerboard. Jumbo frets.
- black headstock with sanded off 'les paul' logo. visible at certain angles.
- Faux Mother of pearl Gibson logo waterslide decal (unapplied) throw in.
- one piece honduras mahogany body back.
- one piece african mahogany top. With 10-top maple veneer, cream binding.
- washed lemon-drop/amber finish relic. natural finish neck and back.
- Gotoh tunamatic bridge and tailpiece, distressed and aged.
- Duncan 59 pickup neck, Dimarzio PAF bridge, russian PIO, 500k pots all round.
- finishing job not at best. Nitro Lacquer all round. One cigeratte mark on area where pickguard can cover it.
- Cream pickguard not installed.
Going for $600, $500 (without pickups)

Billy Gibbons Supermodel replica

- Mighty might rosewood neck 21 custom 6150 frets. 9.5 radius
- Gotoh H.A.P.M tuners
- Canadian hard ash 2 piece center join body dirty blond nitro lacquar finish. Can still see the grains at certain angles.
- Ash tray bridge with 3 steel saddles.
- One dimarzio blue velvet single coil pickup (Alnico 2 magnet)
- 3 way switch and tone knob as dummy. Only vol is connected.
Going for $500.
- cigerette and handroll not installed but is provided.

Viewing and testing at my convenience only if you want to buy.

Trades welcome with Japanese BC Rich. Or parts sold separately possible-make an offer.
 
Back
Top