Need Help with Floyd Rose Tremolo PLZ Help....

[Ironbird]

I have a Ibanez with Edge III Bridge when tuning it goes out of tune

Any one have any video instructions on how to setup a Floyd Rose

If any was any site or videos give me the link Plz

 

[kentheman2000]

put strings in, unlock nut, tune,to something flat at the fat end, lock the nut.
Go nuts with the whammy, unlock the nut, tune again...
repeat until the tuning starts to stabalize, then u can fine tune with your fine tuners!

 

[kentheman2000]

Do remember to do the initial stringing by stopping the trem block from goin all the way into the body. (extreme ah)

 

[Ironbird]

Floyed

I already did all of that but still prob is their i dont know the thing about the trim lock im new to this

 

[akira]

Here's what i always do for FR :

1. Put a 9v batt underneath the bridge at the cavity area.
2. String up & tune guitar alternate with the low & high E 1st followed by the rest.It will take awhile before getting it right.
3. Remove the 9v batt
4. If the bridge is pulling forward,tighten the back screw forward & vice versa if it's pulling backward to level the bridge.

Hope this helps as that's what i usually do.Paiseh if i use the wrong term to describe the trem.

 

[Ironbird]

Floyed

I Will Try That Out Tnx. its just im new the floyd Rose

 

[Phil]

Hey there, check out this thread done up by Shredcow a long time ago.

Here