how to mount a t-rex fuel tank under a pt jr ?

[nigellum]

hey guys, just wondering how you guys do this?

 

[dudelove]

hey nigel, the pedaltrain junior definitely has enough space under the board, so what i did, which is on a pt2, will also apply to ur pt jr.

here's what i did: (i posted this in another thread)

danelectro, i use those dual lock stuff. they are very very dangerous man. DO NOT stick them to the furry side of the velcro. cos they wont come off. they get stuck there and it takes a hell lot of strength to remove it. and when i finally did, i realised that the hooks on the dual lock velcro were ripped off.. they just dont want to let go of the furry side of the velcro.

they are made to stick to an identical piece of dual lock velcro and they are still very strong. but they come off easily when pulled at an angle.

for my pedaltrain, this is what i did, although mine is done with a trex fuel tank junior, its still the same concept. i used the 3M dual lock velcro here.

pardon the glue. i cant rmb what glue i used already but it's meant for woods. i clamped the pieces of wood to the pedalboard for abt an hr till it dried then i stuck the velcro pieces on.

the velcro's adhesive is very very strong, but be sure to stick it to the smooth solid side of the wood.

i'm really pleased with the results actually. :mrgreen:

 

[kerplunk182]

Alamak, there's a thread on this already.

 

[mus]

I was about to post that man!

 

[EngelFaeuste]

 

[tyzjames]

i designed mounts that can fit a fuel tank jr sometime back.. but i cant find a company to fabricate them.. too small time, this one.

For now i use layers upon layers of tape (those thick 1mm kind), just enough to raise the fuel tank jr.. then i used 3m dual lock velcro to stick it to the frame.. Quite neat, actually..

 

[nigellum]

i designed mounts that can fit a fuel tank jr sometime back.. but i cant find a company to fabricate them.. too small time, this one.

For now i use layers upon layers of tape (those thick 1mm kind), just enough to raise the fuel tank jr.. then i used 3m dual lock velcro to stick it to the frame.. Quite neat, actually..

do you have pictures of your work?