mechanevil
Member
Selling a used Fender HM (Heavy Metal) Stratocaster. HSS. 24 frets, maple fretboard, Seymour Duncan Invader in the bridge, Gotoh tuners, Kahler Spyder bridge, Coil Tap for humbucker. Whammy bar. Frets have plenty of life. The truss rod works, but requires a non-standard size hex wrench. Basically this thing, which is was what was used to set it up. http://www.stewmac.com/How-To/Onlin...russ_rod_nut_Good_news_an_easy_solution_.html
If you replace the bullet truss nut and replace it, a standard hex wrench will work. I just haven't had time.
Guitar can be tested at my place at Ang Mo Kio. $600 non-negotiable for a made in the US guitar that only needs some minor work. Come over and check out the fretboard, plays beautifully! Call on Eight 1 3 two 3 six 6 9 to view/test.
If you replace the bullet truss nut and replace it, a standard hex wrench will work. I just haven't had time.
Guitar can be tested at my place at Ang Mo Kio. $600 non-negotiable for a made in the US guitar that only needs some minor work. Come over and check out the fretboard, plays beautifully! Call on Eight 1 3 two 3 six 6 9 to view/test.
