Hi all, I need to power up 2 Strymon pedals which require 9V and at least 250mA each.
But my current power supply is the Voodoo Labs Pedal Power ISO-5 where it has:
a) 3 x 9V with less than 100mA
b) 1 x 9V with up to 400mA
c) 1 x 12V with up to 400mA
d) 1 x 18V with less than 100mA
Which means I can only use b) and c) due to the current requirements. But using c) will damage the pedal as it is 12V. Are there any alternatives besides changing the whole power supply?
Thanks in advance!
But my current power supply is the Voodoo Labs Pedal Power ISO-5 where it has:
a) 3 x 9V with less than 100mA
b) 1 x 9V with up to 400mA
c) 1 x 12V with up to 400mA
d) 1 x 18V with less than 100mA
Which means I can only use b) and c) due to the current requirements. But using c) will damage the pedal as it is 12V. Are there any alternatives besides changing the whole power supply?
Thanks in advance!