MARKED
New member
Hi guys...
I am letting off my personal Vanilla White MAGNETO T-WAVE to raise cash for an acoustic.
Demos can be found here:
Here are the specs...
BODY
Body Wood: American Alder, 2-Piece
Finish: Nitrocellulose Lacquer Finish
Pickguard: Tortoise, Aged White or Magneto Pick-Shield
NECK
Neck Wood: Hard Rock Maple
Finish: Satin Urethane
Fingerboard: East Indian Rosewood
Scale length: 648mm / 25 ½”
Nut Material: Oiled Bone
Nut Width: 42 mm / 1.650”
Frets: .096” X .047”Narrow Jumbo Style Frets (6105 Style)
Nr.of Frets: 22 frets
Neck Profile: Medium C Shape,
Radius: 11” / 280mm Radius
Neck Heel: Tapered
Truss Rod: Single Truss Rod
Truss Rod Nut: Quick Set System
HARDWARE
Bridge: “Tune-O-Flex” Bridge w. Wilkinson Intonated Brass Saddles, 10.8 mm String
Pitch.
Tuners: SG-360-07, Gear Ratio 14:1, Made by Gotoh
String Retainer: “The Cylinder” Low Friction String Guide, made by Gotoh.
Hardware Finish: Chrome
ELECTRONIC PARTS
Pickups: Magneto MTL-2 Bridge / MTP-2 Neck
Pickup Switch: 3-Position “Flip Switch”
Switching: Standard 3-way
Controls: 1 master volume, 1 master tone
Pots: CTS Audio Taper Pots
Output Jack: Switchcraft
STRINGS: 010-046
CASE: Magneto “Mag-Lite” Case included.
ACCESSORIES: Allen Wrench for Bridge Adj
PS. Mine is with a nickel p90 cover, not the usual plastic one
Going only at $2800 (trade wise, no electrics, might consider a gibson j45 acoustic though)
Contact me at 91175223
I am letting off my personal Vanilla White MAGNETO T-WAVE to raise cash for an acoustic.
Demos can be found here:
Here are the specs...
BODY
Body Wood: American Alder, 2-Piece
Finish: Nitrocellulose Lacquer Finish
Pickguard: Tortoise, Aged White or Magneto Pick-Shield
NECK
Neck Wood: Hard Rock Maple
Finish: Satin Urethane
Fingerboard: East Indian Rosewood
Scale length: 648mm / 25 ½”
Nut Material: Oiled Bone
Nut Width: 42 mm / 1.650”
Frets: .096” X .047”Narrow Jumbo Style Frets (6105 Style)
Nr.of Frets: 22 frets
Neck Profile: Medium C Shape,
Radius: 11” / 280mm Radius
Neck Heel: Tapered
Truss Rod: Single Truss Rod
Truss Rod Nut: Quick Set System
HARDWARE
Bridge: “Tune-O-Flex” Bridge w. Wilkinson Intonated Brass Saddles, 10.8 mm String
Pitch.
Tuners: SG-360-07, Gear Ratio 14:1, Made by Gotoh
String Retainer: “The Cylinder” Low Friction String Guide, made by Gotoh.
Hardware Finish: Chrome
ELECTRONIC PARTS
Pickups: Magneto MTL-2 Bridge / MTP-2 Neck
Pickup Switch: 3-Position “Flip Switch”
Switching: Standard 3-way
Controls: 1 master volume, 1 master tone
Pots: CTS Audio Taper Pots
Output Jack: Switchcraft
STRINGS: 010-046
CASE: Magneto “Mag-Lite” Case included.
ACCESSORIES: Allen Wrench for Bridge Adj
PS. Mine is with a nickel p90 cover, not the usual plastic one
Going only at $2800 (trade wise, no electrics, might consider a gibson j45 acoustic though)
Contact me at 91175223