Tube variable mu compressor for $2280.
The controls are: Level knob – controls the signal level post-compression. It does not affect the compression and allows to control the output stage drive level, Threshold knob – sets the side chain threshold, Attack/Release knobs – set the timing, x2 multiplier switch – increases the timing settings by 2, TP/HP mode switch – sets the compression stage mode to triode or pentode respectively, Full Range/150Hz/75Hz switch – enables the high pass filter, which alters the side chain mode to compress less at the given frequencies, Zero Adj.trimmer – adjusts the meter hand position (on the right of the meter when there is no signal), FeedBack/FeedForward switch – sets the side chain mode, In/Bypass – cold bypass, Stereo Link – links the side chains of both channels for a stereo mode. The Left channel takes control over the stereo mode (except for the Level knob, which must be adjusted separately on each channel).
Contact: handcraft_kiev@yahoo.com
The controls are: Level knob – controls the signal level post-compression. It does not affect the compression and allows to control the output stage drive level, Threshold knob – sets the side chain threshold, Attack/Release knobs – set the timing, x2 multiplier switch – increases the timing settings by 2, TP/HP mode switch – sets the compression stage mode to triode or pentode respectively, Full Range/150Hz/75Hz switch – enables the high pass filter, which alters the side chain mode to compress less at the given frequencies, Zero Adj.trimmer – adjusts the meter hand position (on the right of the meter when there is no signal), FeedBack/FeedForward switch – sets the side chain mode, In/Bypass – cold bypass, Stereo Link – links the side chains of both channels for a stereo mode. The Left channel takes control over the stereo mode (except for the Level knob, which must be adjusted separately on each channel).
Contact: handcraft_kiev@yahoo.com
