WTS: RME Multiface 1 + HDPS(e) Expresscard

[theelectricyouth]

RME HDSP(e) + Multiface 1 - $600 (The HDSPe card is slightly chipped, some of the plastic broke off but the unit works perfectly)

Information can all be found on the RME website, this is a really good setup, and at a really good price to get RME quality audio.

9089-3680

Rgds,
Tey

 

[theelectricyouth]

Also taking Best Offer. Pls PM or SMS.

 

[theelectricyouth]

http://www.google.com/products/cata...&sa=X&ei=gTFqTqPzIubHmAX4lZw0&ved=0CDEQ8gIwBQ

The RME Hammerfall HDSP Multiface is a German-made unit that houses 8 - 24-bit/96k - Hz 1/4" I/Os, ADAT optical I/O, ADAT-Sync In, S/PDIF I/O, MIDI I/O, word clock I/O, and a separate analog line/headphone output for independent submixing. When working with several digital sources, Sync - Check technology displays their state and Intelligent Clock Control syncs all data. Front panel LEDS indicate MIDI, sync, and error statuses. Operates with zero CPU load and low latency. Laptops require Hammerfall HDSP PCMCIA Card (not included); tower-type computers require HDSP PCI (not included). - Mix and S/MUX mixing and recording software. Half-rackspace.8 x analog line I/O, 96k - Hz/24-bit, SNR 105d - BA, 1/4" TRS jacks 1 x ADAT digital I/O, based on RME's reliable Bitclock PLL 1 x SPDIF digital I/O, based on RME's reliable DIGI96 technology 1 x ADAT Sync In (9-pin D-type) for sample accurate transfers 1 x word clock I/O (BNC) 1 x analog line/headphone output, separate output for independent submix 1 x MIDI I/O, 16 channels high-speed MIDI HDSP Meter Bridge: freely scalable level meters, peak and RMS calculation directly in hardware Total - Mix: 720 channel mixer with 40-bit internal resolution S/MUX poured in hardware: 4 channels 96k - Hz/24-bit for record and playback via ADAT optical

 

[theelectricyouth]

Apologies, pricing is wrong, was originally published on a european listing!

Its as follows:

Multiface 1 - 500
HDSPe - 350

Buy both and I'll give you a better price.