Wampler pinnacle SOLD!!!
Montreux paradise still available...
Here is the Spec and pics
Product Description
The "Montreux Custom Shop Pedals" is the Montreux effect pedals series, aiming for the world-class effect pedals from Japan, with "Made in Japan" being thoroughly insisted on. The series of processes including the basic design, selection of selective and reliable parts, working of chassis, assembly and operation check is all done in Japan, literally "Made in Japan." In the assembly process, all the components are made by hand-wiring, point-to-point wiring and true bypass as with heart and soul. The domestic production has also a great advantage that the manufacturing process as well as the shipment and even the user support can be controlled based on a thorough communication between Montreux and the manufacturers. Further, the number of units manufactured per month is limited to about ten, so that our products can satisfy all the users. The "Montreux Custom Shop Pedals" is now brought out with the pride of Montreux and the pride of "Made in Japan
The "Paradise Drive" has a modern taste Distortion sound and a classic OverDrive sound in one. Each sound section has three controls of Volume, Tone, and Gain. All sections are independently able to be switched on/off. The Distortion section in the latter stage is characterized in a distinctive edge, biting distortion and presence components rich sound. The OverDrive section in the former stage gives a fat and compression classical TS sound everyone images. The "Paradise Drive" is produced under the concept of the less dead points with drastic settings such as the Gain 10 fully and the experience of different characteristic distortions by one pedal, and thus stands out from other many 2-in-1 pedals in its originality
•Hand-wiring, Point-to-Point, True bypass
•Selective and high-reliable parts are used based on comprehension of every tone characteristic. The assembly is excellently manufactured with such selections all the more because of being hand-made.
•Metallized polyester film capacitors WIMA, AVX, ERO and so on employed
•1/4w ±1% metal film resistors
•At least three types of solders and wirings adequately
--------------------------------------------------------------------------------
