selling this for $150
comes with USB cable
Mic Inputs (A/D)
Input Impedance 2.7k Ohms unbalanced, 5.4k Ohms balanced
Maximum Input Level from +24dBu @ min gain: pad on to -40dBu @ max gain, no pad
Channel-to-Channel Crosstalk: less than -110dB
SNR: -101dB, A-weighted
Dynamic Range: 101dB, A-weighted
THD+N: 0.005% (-86dB) @ -1dBFS, 1kHz
Frequency Response: 20Hz to 20kHz, +/- 0.1dB
Pre-amp Gain: greater than 40dB
Pad: -20dB pad
Indicators: Signal and Clip for each channel
Connectors: two combined XLR/TRS
S/PDIF Digital Audio I/O
Connectors: 2 RCA, one input and one output
Sample Rates: 44.1, 48, 88.2 and 96
Word width: 16 and 24 bits
Instrument Inputs (A/D)
Input Impedance: greater than 220k Ohm, unbalanced
Maximum Input Level: From +22dBV @ min gain, pad on to -42dBV @ max gain no pad
SNR: -100dB, A-weighted
Dynamic Range: 100dB, A-weighted
THD+N: 0.005% (-86dB) @ -1dBFS, 1kHz
Frequency Response: 20Hz to 20kHz, +/- 0.1dB @ 48kHz sample rate
Pre-amp Gain: >40dB
Pad: -20dB pad
Line Inputs (A/D)
Input Impedance: 20k Ohms balanced and unbalanced
Maximum Input Level: +4.1dBu balanced, +1.9dBV unbalanced
Channel-to-Channel Crosstalk: less than -110dB
SNR: -101dB, A-weighted
Dynamic Range: 101dB, A-weighted
THD+N: 0.005% (-86dB) @ -1dBFS, 1kHz
Frequency Response: 20Hz to 20kHz, +/- 0.1dB @ 48kHz sample rate 20Hz to 40kHz, +/- 0.1dB @ 96kHz sample rate
Pad: -20dB pad
Input Inserts (analog)
Maximum Level Send: +6dBV, unbalanced
Maximum Level Return: +6dBV, unbalanced
THD+N: 0.00281% (-91dB) @ -1dB from max level, 1kHz
Frequency Response: 20Hz to 40kHz, +/- 0.1dB
Line Outputs (D/A)
Output Impedance: 150 Ohms unbalanced, 300 Ohms balanced
Maximum Output LevelL +1.8dBV, unbalanced +10.1dBu, balanced
Channel-to-Channel Crosstalk: less than -108dB
SNR: -103dB, A-weighted
Dynamic Range: 103dB, A-weighted
THD+N: 0.005% (-86dB) @ -1dBFS, 1kHz
Frequency Response: 20Hz to 20kHz, +/- 0.3dB @ 48kHz sample rate
Headphone Output (D/A)
Maximum Output: -2.5dBV at THD less than 0.05% into 32 ohms
Working Range: 32 to 600 ohms
I/O Bit Depth Sample Rate (kHz)
With Drivers: 4 x 4 16 44.1/48, 2 x 4 24 44.1/48, 2-in OR 2-out 24 88.2/96
USB class compliant: 2x4 16 44.1/48 (no drivers needed)
Low latency ASIO 2, WDM and Core Audio drivers
Power requirements: 9 VDC @ 500 mA, center pin positive
SMS OR whatsapp 9339 2726
