fgl
Well-known member
http://www.stewmac.com/shop/Electronics,_pickups/Supplies:_Shielding/Conductive_Shielding_Paint.html?actn=100101&xst=3&xsr=515
[TABLE="width: 100%"]
[TR]
[TD]Brush on two or more coats of t
[h=2]Paint-on noise suppression[/h][h=1]Conductive Shielding Paint[/h]
The fastest and easiest way to shield instrument pickup cavities, control cavities and other smaller areas. When connected to electrical ground, the shielded surfaces help reduce noise, hum and radio interference. It cleans up with water while still wet, and dries overnight.
[TABLE="width: 100%"]
[TR]
[TD]
[/TD]
[/TR]
[/TABLE]
his waterbase dark gray conductive paint for best results (let dry between coats). Conductive shielding paint is supplied in a 1/2-pint can, sufficient for shielding several electric guitars, and in a money-saving 1-pint can.
The tin is still almost full - I just finished my last shielding paint job and wont be doing any mods for the forseeable future - so letting this go before it dries up.
grab it - $20 - will throw in free brush that i had used to paint my project cavities
sms 96909640 to deal ... first come first served basis
[/TD]
[/TR]
[/TABLE]
[/URL]
[TABLE="width: 100%"]
[TR]
[TD]Brush on two or more coats of t
[h=2]Paint-on noise suppression[/h][h=1]Conductive Shielding Paint[/h]
[URL="http://www.stewmac.com/shop/Electronics,_pickups/Supplies:_Shielding/Conductive_Shielding_Paint.html?actn=100101&xst=3&xsr=515"] |
The fastest and easiest way to shield instrument pickup cavities, control cavities and other smaller areas. When connected to electrical ground, the shielded surfaces help reduce noise, hum and radio interference. It cleans up with water while still wet, and dries overnight.
[TABLE="width: 100%"]
[TR]
[TD]
[/TD]
[/TR]
[/TABLE]
his waterbase dark gray conductive paint for best results (let dry between coats). Conductive shielding paint is supplied in a 1/2-pint can, sufficient for shielding several electric guitars, and in a money-saving 1-pint can.
The tin is still almost full - I just finished my last shielding paint job and wont be doing any mods for the forseeable future - so letting this go before it dries up.
grab it - $20 - will throw in free brush that i had used to paint my project cavities
sms 96909640 to deal ... first come first served basis
[/TD]
[/TR]
[/TABLE]
[/URL]
