hello all!
USACG tele thinline body - mahogany with maple top (nicely figured). finished in clear gloss. with a back contour/belly cut, which afaik only usacg does.
neck pickup is routed for humbucker. bridge is routed for standard tele bridge pickup.
i will give two tortoise thinline pickguards - both made by pickguardian - one for humbucker and one for mini-humbucker.
btw this is only a tele body. comes with pickguard(s), ferrules and strap pins. does NOT come with neck or pickups or electronics or bridge.
$325 inclusive of the pickguards.
btw I have a gotoh bridge for the tele body which I can sell you for $60.
two lightly used strat conversion necks :
maple/maple 24 3/4 gibson scale conversion necks and they will fit on your fender strat body and intonate without any issue.
neck 1 : similar in profile to warmoth's 'standard thin'. 10-16" compound radius. .1650 nut width. $300
neck 2 : medium U contour - .810 at first fret and .930 at 12th fret (exactly like Gibson slim taper profile). 9 1/2 radius. 1 11/16 nut width - $320
both necks come with graphtech nuts.
pls check the pics :
http://www.flickr.com/photos/33324147@N06/
I don't have a pic of the U neck - but the other neck is on the extreme right. all other necks already sold to fellow softies. last two remaining.
USACG tele thinline body - mahogany with maple top (nicely figured). finished in clear gloss. with a back contour/belly cut, which afaik only usacg does.
neck pickup is routed for humbucker. bridge is routed for standard tele bridge pickup.
i will give two tortoise thinline pickguards - both made by pickguardian - one for humbucker and one for mini-humbucker.
btw this is only a tele body. comes with pickguard(s), ferrules and strap pins. does NOT come with neck or pickups or electronics or bridge.
$325 inclusive of the pickguards.
btw I have a gotoh bridge for the tele body which I can sell you for $60.
two lightly used strat conversion necks :
maple/maple 24 3/4 gibson scale conversion necks and they will fit on your fender strat body and intonate without any issue.
neck 1 : similar in profile to warmoth's 'standard thin'. 10-16" compound radius. .1650 nut width. $300
neck 2 : medium U contour - .810 at first fret and .930 at 12th fret (exactly like Gibson slim taper profile). 9 1/2 radius. 1 11/16 nut width - $320
both necks come with graphtech nuts.
pls check the pics :
http://www.flickr.com/photos/33324147@N06/
I don't have a pic of the U neck - but the other neck is on the extreme right. all other necks already sold to fellow softies. last two remaining.
Last edited: