PGM3 IBANEZ floyd rose help!

[YAGO]

I'm having a problem setting my floyd rose... the bridge is too high!! and i am using 0.9mm strings, i dont know what to doi am afraid to blow up the bridge.

what should i do to low the bridge??! so its stays paralel to the guitar...


and sorry about my bad english...

i can provide pictures if needed

 

[LadyInTears]

gooogle is your best friend.

but i suggest you send it for a set up at beez or whoever.

 

[dmitry_a]

Is your bridge just high but level or is it high and unlevel with the body? Pictures will help. if you're scared about ruining your guitar, take it to a shop.

 

[relinquish69]

if you have trouble describing, can use pictures. better for us too

 

[J.custom]

I think you should send it for setup, if you're afraid to 'blow' your bridge, safest and best alternative.

 

[reez_rock]

a good setup from a good tech will solve the problem. If you dun use whammy bar a lot. I recommend to just block it.

 

[YAGO]

ty

ty guys i shall provide pictures... then if u can help me good if not, i take it to a shop

 

[cliffgod]

I think you should take it to the shop and restring once and learn how to do it at the shop.

If the guitar is already setup before and you wanted a restring, just my way of restringing, as you are tuning/tightening the strings, you need to check the floyd rose if it is floating upward and if it is, you need to open up your guitar back cover and you will see the floyd rose's spring, you need to screw in/ tighten the spring more. This process normally takes me about 15 -30 minutes, so please do not expect that its easy. Hope that helps. Have fun! Cheers