HELP NEEDED: Mounting PSU to Pedaltrain.

[tubescreamer]

So, I followed the instructions on the Pedaltrain site, aligned the holes, fired up the drill, but my drill can't seem to bore a hole through the frame. I've only managed to dent the surface.

If anyone has successfully managed to drill the pilot holes and have the confidence to do so again, AND you are willing to help me out, please PM/SMS me (9487 0407) and I will bring my PT2 frame down to wherever you are.

Cheers!

 

[kerplunk182]

Do a search on mounting PSU on Soft. There are alternatives to mounting, other than drilling (affects resale value too).

 

[FITCH]

tubescreamer: You may want to check your drill bits. You are drilling through aluminum, so if you're using a drill bit meant for wood/concrete, it'll be tough. I second kerplunk182's suggestion, unless your PT2 is for keeps. Cheers!

 

[Lifehouse]

So, I followed the instructions on the Pedaltrain site, aligned the holes, fired up the drill, but my drill can't seem to bore a hole through the frame. I've only managed to dent the surface.

If anyone has successfully managed to drill the pilot holes and have the confidence to do so again, AND you are willing to help me out, please PM/SMS me (9487 0407) and I will bring my PT2 frame down to wherever you are.

Cheers!

Just want to check with you, but does your drill have a reverse mode? Make sure you are not in reverse mode otherwise all it does is scratch the pain.