Footswitch?

[theunknown]

hi guys is a footswitch like this possible? if so, is there anyone (person, shop) who can make it for me?

EDIT: kk i dont know if parallel is possible or not, but i hope u get the idea, just wondering if the outcome is possible as below.

switch 1 = master switch (bypass/engage both)
switch 2 = engage pedal 1
switch 3 = engage pedal 2

thing is, i want LEDs for the respective pedals to still light up if the pedal(s) are engaged even if the master switch is off. so if i were to press master switch, i know what pedals will be engaged. but looking at my schematic (or lousy drawing haha), my non-engineering mind says its not possible cause there's no signal path. so is it possible?

OR OR OR

4 switches

1 = master on
2 = master off
3 = pedal 1 only
4 = pedal 2 only

thanks

 

[ipman]

If both pedals are engaged, aren't they running in parallel? That's weird.

 

[theunknown]

hahahaha ok my bad, dont trust the diagram. i dont know if there's such thing as efx running in parallel. i know nuts about electronics.

ignoring the diagram, isit possible? if u get what i mean by the other explanations.

 

[MutantBanana]

Its more of a loooper than a footswitch but there might be tone loss, popping noises when disengaging one parallel and volume drops through individual effects if im not wrong. You might want to earth the parallel effects when disengaged and use 3PDTs for the indicator light. Tymc can do it.

 

[theunknown]

ooooh yeah i had guessed tymc can do it. well maybe i can consult them with my needs. don't really understand the jargons now. but thanks for the heads up mutantbanana. any other comments and suggestions will certainly be useful like possible tone loss, volume loss etc.

 

[Dime]

Reminds me of physics.

 

[Breen]

Music and guitar playing essentially is all physics~