Custom handmade Pickguard for guitars and basses. Using 3 or 4 ply celluloid materials.
Pls do not request to cut metal or glass.
Require either your original Pickguard or a tracing of the original Pickguard on paper. I can do dissembling and assembly of Pickguard for you, but you have to bring along the whole guitar.
See below for tracing details
This is a home based hobby run by passion for guitars. Turn around time is usually 4 weeks.
Self drop off and collection please (West Side)
50% deposit is required for every transaction.
If you want to change parts (Pickups, pots, capacitors, strings, etc) please bring them along.
Instructions for Tracings and Ordering
1) Please use only a clean, sharp-pointed writing instrument such as a pencil, pen, or fine tip roller pen. (Do not use magic markers or anything with a wide tip)
2) Please trace carefully, top side up, on a piece of paper (Standard printer/copier paper is recommended. You may tape two pieces of paper together for oversized guards. (Please do not use napkins, tracing paper, corrugated cardboard, etc.) Faxes and photocopies are not acceptable.
3) Please do not cut out the tracing once completed. Be sure to trace everything cut into the pickguard. (Pickup holes, switch slots, potentiometer holes, mounting screw holes and pickup height adjustment screw holes). If you are deleting, relocating or changing electronics on the pickguard, place them in the positions required. Pickup changes must show exact locations, dimensions and manufacturer.
4) Please include with your tracing your contact number, email, and type of material. Please note: Your custom guard can only be as good as your tracing, so take your time and follow the above instructions, as custom pickguards (non-standard templates) are non- returnable.
The following may incur additional costs
1. Dissembling + assembling of pickguards for you
2. Installation of additional parts
3. Truss rod, tremolo spring cover
PM or Whatsapp for details and pricing (9749 2878)
Pls do not request to cut metal or glass.
Require either your original Pickguard or a tracing of the original Pickguard on paper. I can do dissembling and assembly of Pickguard for you, but you have to bring along the whole guitar.
See below for tracing details
This is a home based hobby run by passion for guitars. Turn around time is usually 4 weeks.
Self drop off and collection please (West Side)
50% deposit is required for every transaction.
If you want to change parts (Pickups, pots, capacitors, strings, etc) please bring them along.
Instructions for Tracings and Ordering
1) Please use only a clean, sharp-pointed writing instrument such as a pencil, pen, or fine tip roller pen. (Do not use magic markers or anything with a wide tip)
2) Please trace carefully, top side up, on a piece of paper (Standard printer/copier paper is recommended. You may tape two pieces of paper together for oversized guards. (Please do not use napkins, tracing paper, corrugated cardboard, etc.) Faxes and photocopies are not acceptable.
3) Please do not cut out the tracing once completed. Be sure to trace everything cut into the pickguard. (Pickup holes, switch slots, potentiometer holes, mounting screw holes and pickup height adjustment screw holes). If you are deleting, relocating or changing electronics on the pickguard, place them in the positions required. Pickup changes must show exact locations, dimensions and manufacturer.
4) Please include with your tracing your contact number, email, and type of material. Please note: Your custom guard can only be as good as your tracing, so take your time and follow the above instructions, as custom pickguards (non-standard templates) are non- returnable.
The following may incur additional costs
1. Dissembling + assembling of pickguards for you
2. Installation of additional parts
3. Truss rod, tremolo spring cover
PM or Whatsapp for details and pricing (9749 2878)
