Beautiful cosmetic match to the aluminium iMacs and notebooks. SMS 97612345 no PM pls.
Killer sound. Better than Genelecs IMHO.
Relatively small, two-way active monitor designed for use with desktop audio systems, but unlike most multimedia desktop speakers, which are anything but accurate reference sources, the Artists use the same technology as in ADAM's larger studio monitors to deliver studio monitor performance in environments where conventional monitors would be too large. Like ADAM's larger monitors, the Artist uses ADAM's own folded-ribbon tweeter to handle frequencies above the 2.2kHz crossover point, while a 5.5-inch foam-sandwich-cone woofer takes care of the bass and mid-range. Because the ADAM ribbon tweeters work up to very high frequencies, the overall frequency response extends from 52Hz right up to 35kHz (±3dB) with a maximum SPL capacity of 102dB at one metre. This level is somewhat less than you'd expect from a large studio monitor, but still adequately loud for comfortable (and safe) sustained monitoring at close quarters. For more details on the technology behind the ADAM ART folded-ribbon tweeter.
Measuring 190 x 250 x 218mm, the cabinets have something of a consumer hi-fi look to them, but rather than being made from the silvered plastic that's so common in such circles, they are in fact fabricated from thick aluminium and weigh a substantial 8kg each. Inside each cabinet is a pair of 50W power amplifiers (80W peak capacity) fed from an integral active crossover. A rocker power switch and rotary volume control are easily accessible on the front panel, while the rear panel houses a balanced XLR input (but oddly no balanced jack input), an unbalanced phono input, and three screwdriver-adjustable controls.
The first two controls are described as Room EQ. The first has a range of ±6dB at 150Hz and below, while the second has the same range but operating at 6kHz and above. These provide EQ 'tilt' rather than shelving characteristics. A third control adjusts the tweeter level relative to the woofer over a ±4dB range. By default these are all set to their flat positions. A recessed voltage selector allows 230V or 115V operation and power comes in via the familiar IEC socket. There's considerable overhang at the rear of the cabinet to hide and protect the connections and controls, and there's a threaded standmounting insert in the base.
The cabinets, which have a silver anodised finish, are manufactured from a heavy aluminium extrusion with top, bottom, and back plates to complete the enclosure. A metal grille protects the woofer, with a similar grille material hiding the opening of the reflex port. A slotted plate protects the tweeter, which is also recessed slightly. The Artists are designed specifically for upright use, so shouldn't be used sideways because the dispersion pattern will be compromised and the sweet spot made considerably narrower.
Killer sound. Better than Genelecs IMHO.
Relatively small, two-way active monitor designed for use with desktop audio systems, but unlike most multimedia desktop speakers, which are anything but accurate reference sources, the Artists use the same technology as in ADAM's larger studio monitors to deliver studio monitor performance in environments where conventional monitors would be too large. Like ADAM's larger monitors, the Artist uses ADAM's own folded-ribbon tweeter to handle frequencies above the 2.2kHz crossover point, while a 5.5-inch foam-sandwich-cone woofer takes care of the bass and mid-range. Because the ADAM ribbon tweeters work up to very high frequencies, the overall frequency response extends from 52Hz right up to 35kHz (±3dB) with a maximum SPL capacity of 102dB at one metre. This level is somewhat less than you'd expect from a large studio monitor, but still adequately loud for comfortable (and safe) sustained monitoring at close quarters. For more details on the technology behind the ADAM ART folded-ribbon tweeter.
Measuring 190 x 250 x 218mm, the cabinets have something of a consumer hi-fi look to them, but rather than being made from the silvered plastic that's so common in such circles, they are in fact fabricated from thick aluminium and weigh a substantial 8kg each. Inside each cabinet is a pair of 50W power amplifiers (80W peak capacity) fed from an integral active crossover. A rocker power switch and rotary volume control are easily accessible on the front panel, while the rear panel houses a balanced XLR input (but oddly no balanced jack input), an unbalanced phono input, and three screwdriver-adjustable controls.
The first two controls are described as Room EQ. The first has a range of ±6dB at 150Hz and below, while the second has the same range but operating at 6kHz and above. These provide EQ 'tilt' rather than shelving characteristics. A third control adjusts the tweeter level relative to the woofer over a ±4dB range. By default these are all set to their flat positions. A recessed voltage selector allows 230V or 115V operation and power comes in via the familiar IEC socket. There's considerable overhang at the rear of the cabinet to hide and protect the connections and controls, and there's a threaded standmounting insert in the base.
The cabinets, which have a silver anodised finish, are manufactured from a heavy aluminium extrusion with top, bottom, and back plates to complete the enclosure. A metal grille protects the woofer, with a similar grille material hiding the opening of the reflex port. A slotted plate protects the tweeter, which is also recessed slightly. The Artists are designed specifically for upright use, so shouldn't be used sideways because the dispersion pattern will be compromised and the sweet spot made considerably narrower.