vickitek007
New member
Hi all!
Putting up 2 old keyboard models up for sale!
1. Roland XP-50 (Will be repaired by Swee Lee if there is a buyer!)
The XP-50 is not just another synthesizer workstation, it's basically a JV-1080 with a built-in keyboard and a 16-track sequencer! It is a digital synthesizer using sampled ROM waveforms. Superb sound quality capable of emulating most any instrument imaginable plus totally fat analog synth type sounds and loads of percussion! It has 64 voices of polyphony and is 16-part multitimbral. The XP-50 makes a great beginner's pro-quality workstation.
It has 8MB of sounds and it also offers a lot of expandability with 4 expansion slots and 2 data card memory slots. You can get up to 42MB of sounds by adding any of the popular SR-JV80 expansion cards suited for Techno, World Instruments, Orchestral or Synthesizers. There's also plenty of multi-effects, reverbs, choruses and filters for creative flexibility, motion control and extensive MIDI implementation.
Some of the features the XP-50 brings (to the JV-1080) are a standard 61-note keyboard with velocity and aftertouch. The MRC-PRO 16-track sequencer which features 60,000 note capacity and can hold 100 patterns and 1 song. Several recording features (loop, step, realtime), quantization and editing features are available too. A built-in 3.5 inch disk drive facilitates storage of your sequences and MIDI data. With a 'bang for your buck' value the XP-50 still makes a great keyboard alternative to the JV-1080. That means you get some of Roland's best sounds in a performance workstation that is as affordable as 'pro-quality' can get (beyond which come the XP-60 and XP-80 mega-synths). It has been used by The Cure.
"Can't be tested out as it is in the service centre already. Please SMS me to reserve it and I will proceed with the repair based on trust. "
2. Korg X3
The nineties update to the legendary M1. Launched in 1993, it expanded on what made the M1 such a great machine and featured a range of solid, entirely usable sounds. The Strings and Basses are exceptionally good, although truly analog sounding sweeps and pads are not what this machine was about. The X3 (and subsequent X-series models that came after it) was designed as a middle-weight workstation, with the warmer and more powerful 01/W series taking the reins as Korg's premiere ROMpler workstation of the early nineties.
The X3 is based around 6 MB of 16-bit multi-samples, with basses, guitars, strings, drums, pads and much more. You can even add more PCM sounds to the synth, but additional PCM cards are expensive and/or hard to find.
Detailed editing and a flexible sequencer make this machine more than capable of running a MIDI rig if you are averse to PC based sequencing. If you can live without large touch sensitive screens or resonant filters, then you will find the X3 packs more punch than you may imagine. A rewarding synth to own, even 10 years down the line. What it lacks in instant hands-on tweak-ability and cutting edge sounds, it makes up for in the ultimately usable range of sounds. It has been used by Vangelis.
"One key is loose. Will be sending it for repair also if there is a buyer! Feel free to test out at Ubi Ave 1 for now. "
Please call/sms me at 91o98359 to deal!
Putting up 2 old keyboard models up for sale!
1. Roland XP-50 (Will be repaired by Swee Lee if there is a buyer!)
The XP-50 is not just another synthesizer workstation, it's basically a JV-1080 with a built-in keyboard and a 16-track sequencer! It is a digital synthesizer using sampled ROM waveforms. Superb sound quality capable of emulating most any instrument imaginable plus totally fat analog synth type sounds and loads of percussion! It has 64 voices of polyphony and is 16-part multitimbral. The XP-50 makes a great beginner's pro-quality workstation.
It has 8MB of sounds and it also offers a lot of expandability with 4 expansion slots and 2 data card memory slots. You can get up to 42MB of sounds by adding any of the popular SR-JV80 expansion cards suited for Techno, World Instruments, Orchestral or Synthesizers. There's also plenty of multi-effects, reverbs, choruses and filters for creative flexibility, motion control and extensive MIDI implementation.
Some of the features the XP-50 brings (to the JV-1080) are a standard 61-note keyboard with velocity and aftertouch. The MRC-PRO 16-track sequencer which features 60,000 note capacity and can hold 100 patterns and 1 song. Several recording features (loop, step, realtime), quantization and editing features are available too. A built-in 3.5 inch disk drive facilitates storage of your sequences and MIDI data. With a 'bang for your buck' value the XP-50 still makes a great keyboard alternative to the JV-1080. That means you get some of Roland's best sounds in a performance workstation that is as affordable as 'pro-quality' can get (beyond which come the XP-60 and XP-80 mega-synths). It has been used by The Cure.
"Can't be tested out as it is in the service centre already. Please SMS me to reserve it and I will proceed with the repair based on trust. "
2. Korg X3
The nineties update to the legendary M1. Launched in 1993, it expanded on what made the M1 such a great machine and featured a range of solid, entirely usable sounds. The Strings and Basses are exceptionally good, although truly analog sounding sweeps and pads are not what this machine was about. The X3 (and subsequent X-series models that came after it) was designed as a middle-weight workstation, with the warmer and more powerful 01/W series taking the reins as Korg's premiere ROMpler workstation of the early nineties.
The X3 is based around 6 MB of 16-bit multi-samples, with basses, guitars, strings, drums, pads and much more. You can even add more PCM sounds to the synth, but additional PCM cards are expensive and/or hard to find.
Detailed editing and a flexible sequencer make this machine more than capable of running a MIDI rig if you are averse to PC based sequencing. If you can live without large touch sensitive screens or resonant filters, then you will find the X3 packs more punch than you may imagine. A rewarding synth to own, even 10 years down the line. What it lacks in instant hands-on tweak-ability and cutting edge sounds, it makes up for in the ultimately usable range of sounds. It has been used by Vangelis.
"One key is loose. Will be sending it for repair also if there is a buyer! Feel free to test out at Ubi Ave 1 for now. "
Please call/sms me at 91o98359 to deal!
