AER Alpha acoustic combo amplifier $600

TOTALVOCAL

New member
AER Alpha $600

CONTACT: 81006057

Great condition, beautiful sounding amp.

Small, smart, and surprisingly loud.

The AER Alpha is a compact combo amp for acoustic instruments. It has one channel with 2 individual inputs that allow parallel use of instrument and microphone, even though the instrument is the main focus. Inputs each have their own gain knob. Birch plywood cabinet provides great tone projection and is road tough. Dynamic controlled 40 Watts RMS and the 8" twin-cone speaker system give perfect performance at all sound pressure levels. Onboard reverb, external effects loop and headphone out.

The Alpha amplifier defines the starting point of serious acoustic amplification at AER. Based on the success and the experience with the Compact 60 they have developed an even smaller, lightweight model that has no difficulties living up to the rigors of the road. Amazingly reduced, without losing what is essential for superb performance - the Alpha is a full size member of the AER product family. Open sounding and quick in response, this guitar amp masters different ranges and is not afraid of bigger instruments.

Effects

The AER Alpha has an integrated (internal) digital reverb effect on board. The return control determines the intensity of the effect (as far to the left as possible means no effect). Furthermore, a supplementary effect device can be connected (external effect). For this purpose, use the sockets send and return at the rear of Alpha to connect the external device (send to the input, return from the output of the external effect). The intensity will then be set by the controls of external effect device. A standard double foot switch can be connected to the footswitch socket on the rear of the amp with a stereo cable. This switch can be used to turn the internal and external effects on and off.
Features

Front panel
Combination XLR male and 1/4" inch input with individual gain knob
Line/mic preamp mode selector switch line: sources with line level, instruments with active preamplifiers and magnetic sound pick-ups, mic: symmetrical microphone input with 24V phantom source
1/4" input 2 line level with individual gain knob
Pad switch to adjust input sensitivity up position: standard line level down position: reduction by 10 db/V
LED Clip overload indicator for both channels
Color mid-range contour filter, only active for input 2
Bass, middle, treble, effect return and master levels for both inputs
On LED
Outputs
Phones: headphone output
Line-out: preamplifier output post-master control
DI-out: XLR output pre master control effect loop mono, parallel send: output, to input of an external device
Return: input, from output of an external device or from another signal source, e.g. CD player
Footswitch: connection to a double foot switch-to-switch internal and external effect on and off
Power: combined mains switch with a mains socket and a fuse holder (1 a slow-blow)
Accessory: 3/8" microphone stand adapter
Carrying bag
 
Last edited:

Latest posts

Back
Top